ADA assistive listening devices and requirements
ADA assistive listening devices are required in assembly areas where people listen to amplified sound. The 2010 ADA Standards set how many receivers you need. Here is the table, worked through for common venue sizes, with the kits ABBN supplies to meet it.
- 2
- receivers in any room that needs a system
- 25%
- of receivers must work with hearing aids
- 1/8 in
- standard mono jack on every receiver

- Authorized dealer for the industry's leading brands
- Conference audio since 1994
- Receiver counts worked out for you
- Hearing-aid share planned in

When the ADA requires assistive listening
Section 219 of the 2010 ADA Standards asks for an assistive listening system wherever audible communication is integral to an assembly area. Think auditoriums, sanctuaries, lecture halls, council chambers, theaters and meeting rooms.
There is one exception: a room with no audio amplification does not need a system. Courtrooms are the exception to the exception, and need one either way. State and local codes can add their own rules, so confirm the details with your architect or code official.
How many ADA assistive listening devices you need
The minimum rises with seating capacity. A second column sets how many of those receivers must work with hearing aids.
| Seats in the assembly area | Receivers required | Hearing-aid compatible |
|---|---|---|
| 50 or fewer | 2 | 2 |
| 51 to 200 | 2, plus 1 per 25 seats over 50 | 2 |
| 201 to 500 | 2, plus 1 per 25 seats over 50 | 1 per 4 receivers |
| 501 to 1,000 | 20, plus 1 per 33 seats over 500 | 1 per 4 receivers |
| 1,001 to 2,000 | 35, plus 1 per 50 seats over 1,000 | 1 per 4 receivers |
| 2,001 and over | 55, plus 1 per 100 seats over 2,000 | 1 per 4 receivers |
"Per 25 seats" and the other ratios count any part of a block as a whole one, so always round up. Source: 2010 ADA Standards for Accessible Design, 219.3.
The math for common venue sizes
Most venues land on one of these counts. Send us yours and we check it against your floor plan.
| Seats | Receivers | Hearing-aid compatible | How it adds up |
|---|---|---|---|
| 40 | 2 | 2 | The minimum for any room that needs a system |
| 150 | 6 | 2 | 2, plus 4 for the 100 seats over 50 |
| 300 | 12 | 3 | 2, plus 10 for the 250 seats over 50; a quarter of 12 is 3 |
| 800 | 30 | 8 | 20, plus 10 for the 300 seats over 500; a quarter of 30, rounded up |
| 1,500 | 45 | 12 | 35, plus 10 for the 500 seats over 1,000 |
| 2,500 | 60 | 15 | 55, plus 5 for the 500 seats over 2,000 |
Counts are the federal minimum. A few spares mean a flat battery never leaves a guest without a receiver.
What else a compliant system needs
The receiver count is only one part of the standard. These are the other requirements we plan for in every ADA quote.
Neckloops for hearing aids
Section 706.3 counts a receiver as hearing-aid compatible when it works with T-coils through a neckloop. Earbuds and over-ear headsets do not count. See hearing loops and neckloops.
A standard jack
Every required receiver needs a 1/8 in (3.2 mm) mono jack (section 706.2). Listeners can then plug in their own earphones or a neckloop.
Enough volume, clean sound
Sections 706.4 to 706.6 ask for 110 to 118 dB with a 50 dB volume range. Noise must sit at least 18 dB below the signal, with no more than 18 dB of peak clipping.
A sign at the door
Section 216.10 asks for signs with the International Symbol of Access for Hearing Loss. A sign at each ticket office or window can replace one at every room.
One pool for several rooms
One management running several assembly areas in a building may count receivers on the total seats. Every receiver must then work with every system.
Rooms served by a loop
If an induction loop serves every seat, the separate hearing-aid-compatible minimum does not apply. The total receiver count still does.
A summary, not legal advice
This page sums up the federal 2010 ADA Standards for Accessible Design, sections 216.10, 219 and 706. Your architect, code official or counsel has the final word on your building.
Want us to check your numbers?
Send us the seat count for each room and how they are run. We reply fast with the receiver count, the hearing-aid share and a kit to match.
Kits that start with the right count
Each Williams AV kit pairs its receivers with neckloops, so a small venue can meet the table in one order. Larger venues get receivers added to match the seats.

FM+ system with 4 receivers
Model FM 557 PRO
An FM T55C transmitter, 4 R37 receivers with earphones, 2 NKL 001 neckloops, a remote antenna and an IDP 008 sign. Four receivers and two neckloops cover rooms of up to 100 seats.
See it in Williams AV FM+ assistive listening →
IR+ Complete
Model IR SY11
An IR M1 control center, 2 IR E4 emitters, 4 WIR RX22-4N receivers and 2 NKL 001 neckloops. The same 100-seat count, with sound that stays inside the room.
See it in Williams AV IR+ infrared assistive listening system →
WaveCAST system with 12 receivers
Model WF SYS3C
A WaveCAST C transmitter, 12 WAV Pro receivers, 2 chargers, 3 NKL 008 neckloops and an IDP 008 plaque. Enough receivers and neckloops for up to 300 seats.
See it in Williams AV WaveCAST Wi-Fi assistive listening →
Hearing assistance sign
Model IDP 008
A wall plaque with the hearing loss symbol that tells guests assistive listening is available. Included in the FM 557 PRO and WaveCAST kits.
See it in Williams AV FM+ assistive listening →We do the math with you
Since 1994 our clients have included school districts, churches and nonprofits. For each of them, the count is where planning starts, not where it stops.
Send us the seats
One number per room is enough. We work through Table 219.3 and tell you the receivers and neckloops each room needs.
We match the room
FM for big or open spaces, infrared where audio must stay private, Wi-Fi where guests would rather use their phones.
Nothing left off the list
Receivers, neckloops, chargers and the sign go on one quote, so the system is complete on the day it arrives.
Why plan your ADA system with ABBN
Compliance is the floor. The goal is that every guest who needs help hearing actually gets it.
Authorized for the systems venues rely on
Williams AV and Listen Technologies systems, supplied by an authorized dealer for the industry's leading brands, nationwide since 1994.
Built for courtrooms
Infrared keeps proceedings inside the courtroom, and IR+ carries two channels, so one of them can carry an interpreted language.
From the rule to the right system
Once you know the count, choose how the sound reaches your guests. ABBN supplies every option below.

Assistive listening systems
FM, infrared and Wi-Fi assistive listening from Williams AV and Listen Technologies, compared.
Explore →
Hearing loop systems
Neckloops that make a receiver count toward the hearing-aid-compatible minimum.
Explore →
Assistive listening for churches
How sanctuaries meet the count, with FM receivers and phone listening side by side.
Explore →Have a custom request?
Not every event fits a standard kit. Maybe it is a model we do not list, an unusual room or a tight deadline. Tell us what you need, and our team builds the solution around it.
Frequently asked questions
The questions facility managers, architects and event planners send us about ADA hearing assistance.
How many assistive listening devices does the ADA require?
The count follows the seats. Rooms of 50 or fewer need 2. From 51 to 500 seats, add 1 for every 25 seats over 50. From 501 to 1,000, start at 20 and add 1 per 33 seats over 500. The full table is above.
How many receivers must work with hearing aids?
At least 25 percent of the receivers, and never fewer than two. Up to 200 seats the minimum is two; from 201 seats it is 1 for every 4 receivers, rounded up.
What makes a receiver hearing-aid compatible?
A neckloop. The 2010 ADA Standards count a receiver as compatible when it works with hearing aid T-coils through a neckloop. Earbuds and headphones worn over the ear do not count.
Does every room need an assistive listening system?
Every assembly area where audible communication is integral to the use of the space, if it has audio amplification. Courtrooms need one even without amplification.
Do we need a sign?
Yes. Each assembly area that needs a system needs a sign with the International Symbol of Access for Hearing Loss. Signs at each ticket office or window can stand in for signs at every room.
Can several rooms share receivers?
Yes, if one management runs them and every receiver works with every system. The count is then based on the total seats in those rooms.
How do I get a price for an ADA-compliant system?
Send us the seats in each room and the room type. We quote the system, the receivers, the neckloops and the sign, with the count worked out.
Get the count right the first time
Send us your seat count. We reply fast with the receivers, the neckloops and a kit that fits.
















