
Listen Technologies ListenIR
The ListenIR assistive listening system from Listen Technologies carries sound on infrared light from radiators to pocket receivers, so the audio stays inside the room. It suits courtrooms, boardrooms and theaters with up to four channels. Choose a portable kit, the wall-mounted LT-84 or rack transmitters with LA-140 radiators, and a receiver with or without listener channel choice.
- 40,000
- sq ft per LA-140 radiator, one channel
- 4
- channels in one room
- 8 h
- receiver battery, charges in 2.5
Prefer to call? 480-596-0047
- Authorized Listen Technologies dealer
- Conference audio since 1994
- Up to four channels per room
- Dante versions available
Is ListenIR the right system?
Infrared works by line of sight: listeners need a clear view of a radiator. The signal does not leak into the corridor or the courtroom next door. That makes it the choice for confidential proceedings and for buildings where several rooms run listening systems side by side. Coverage depends on the room's shape, so we size the radiators from a floor plan.
Build your bundle
Put together exactly what your room needs: transmitters, radiators, receivers, neck loops and charging, in any quantity. That runs from a few receivers for a system you already run to a courtroom fitted out from scratch. The builder works out the ADA minimum from your seating capacity.
- Answer only what is relevant to youSkip anything you are not sure of. We fill the gaps with you before we quote.
- Watch your bundle buildEvery answer adds the parts it needs, with an estimated quantity.
- Get a fast replyWe check every line against Listen's current range and reply fast with one itemized quote.
You are pricing a purchase. Renting for one event? Switch to Rent and add your dates at the end.
That is everything we need. Check your bundle and get your quote.
Your quote request
This is what we will price. Add where to send the quote and we reply fast.
Prefer to talk it through? Call 480-596-0047.
Trusted by organizations across the US
School districts, churches, nonprofits and companies that work with ABBN.








Ready-made bundles
Complete systems boxed by Listen, from the portable kit to rack systems with a separate radiator. Quote one as it is, or build your own above.
x1+
x2Portable ListenIR iDSP System
Good for small to medium rooms of up to 50 people, set up on a table from its own carrying case.
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 2 x Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-277
- 1 x LA-338
- 1 x LA-346
- 1 x LA-423
x1+
x2ListenIR iDSP Level I System
Good for a single room on one channel: the wall-mounted LT-84 with two receivers to start.
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 2 x Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-423
x1+
x2ListenIR iDSP Level I System (Dante)
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 1 x Dante 1 Channel Output XLR Adapter
- 1 x LA-507
- 2 x Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-423
x1+
x2ListenIR iDSP Level II System
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 2 x Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
x1+
x2ListenIR iDSP Level II System (Dante)
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 1 x Dante 1 Channel Output XLR Adapter
- 1 x LA-507
- 2 x Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
x1+
x4ListenIR iDSP Level III System
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 4 x Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
Show more bundles
x1+
x2ListenIR Advanced iDSP Level I System
Good for two channels: LR-5200-IR receivers let each listener choose.
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 2 x Advanced Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-423
x1+
x2ListenIR Advanced iDSP Level II System
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 2 x Advanced Intelligent DSP IR Receiver
- 2 x Intelligent Ear Phone/Neck Loop Lanyard
- 2 x Universal Ear Speaker
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
x1+
x4ListenIR Advanced iDSP Level III System
- 1 x ListenIR 2-Channel Transmitter/Radiator Combo
- 4 x Advanced Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
x1+
x1+
x4ListenIR iDSP Standard System
Good for a larger room: a rack-mounted LT-82 with a separate LA-140 radiator.
- 1 x LT-82-01
- 1 x Universal Rack Mounting Kit
- 1 x LA-140
- 4 x Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-304
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
x1+
x1+
x4ListenIR iDSP Standard System (Dante)
- 1 x LT-82-01
- 1 x Dante 1 Channel Output XLR Adapter
- 1 x Universal Rack Mounting Kit
- 1 x LA-140
- 4 x Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-304
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
x1+
x1+
x4ListenIR iDSP Standard System
- 1 x LT-82-01
- 1 x Universal Rack Mounting Kit
- 1 x LA-140
- 4 x Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-304
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
x1+
x1+
x4ListenIR iDSP Standard System (Dante)
- 1 x LT-82-01
- 1 x Dante 1 Channel Output XLR Adapter
- 1 x Universal Rack Mounting Kit
- 1 x LA-140
- 4 x Intelligent DSP IR Receiver
- 4 x Intelligent Ear Phone/Neck Loop Lanyard
- 4 x Universal Ear Speaker
- 1 x LA-304
- 1 x LA-422
- 1 x Intelligent 12-Unit Charging Tray
- 1 x LA-382
- 1 x LA-904
x6Intelligent DSP IR Receiver 6-Pack
- 6 x LR-4200-IR-P1
- 1 x LA-381
x12Intelligent DSP IR Receiver 12-Pack
- 12 x LR-4200-IR-P1
- 1 x LA-381
x6Advanced Intelligent DSP IR Receiver 6-Pack
- 6 x LR-5200-IR-P1
- 1 x LA-381
x12Advanced Intelligent DSP IR Receiver 12-Pack
- 12 x LR-5200-IR-P1
- 1 x LA-381
x1Intelligent DSP IR Receiver Package 1
- 1 x Intelligent DSP IR Receiver
- 1 x Intelligent Ear Phone/Neck Loop Lanyard
- 1 x Universal Ear Speaker
x1Advanced Intelligent DSP IR Receiver Package 1
- 1 x Advanced Intelligent DSP IR Receiver
- 1 x Intelligent Ear Phone/Neck Loop Lanyard
- 1 x Universal Ear Speaker
Not sure which setup you need?
Send us a floor plan or a photo of the room with the ceiling height, or give us a call. We reply fast, work out the radiators and receivers, and check what an existing Listen system can keep.
What is inside a ListenIR system
Every system has four parts. A transmitter is fed by the room's sound system, and radiators light the room with the infrared signal. Listeners carry pocket receivers, with neck loops and chargers to go with them. In the LT-84 the transmitter and radiator are one unit; the LT-82 drives separate LA-140 radiators.

Transmitters
The LT-84 is a transmitter and radiator in one wall-mountable unit carrying two channels. The LT-82 sits in a rack or on a desk, carries one channel and powers up to two LA-140 radiators over CAT-5. Use one per channel, up to four in a room. Dante versions add the LA-465 adapter, which needs a PoE switch.
- ListenIR 2-Channel Transmitter/Radiator ComboModel LT-84-01
Specs and datasheet
ListenIR 2-Channel Transmitter/Radiator Combo datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz, Selectable Channels Two (2) channels, Selectable carrier frequency Coverage 2,787 m² (30,000 ft²) single channel with LR-4200-IR/LR-5200-IR receivers or 697 m² (7,500 ft²) single channel with LR-42/LR-44 receivers Snr > 70 dB (SNR) Line Input, > 60 dB (SNR) System Specification (wireless end-to-end with LR-4200) dB Frequency response 20 Hz – 20 kHz (+/- 1 dB) Line Input, 63 Hz – 15 kHz (+/- 3 dB) System Specification (wireless end-to-end with LR-4200) Hz Mic input Two (2) 3.5 mm (0.14 in.) Tip/Sleeve connector, -30 dBu nominal input, +14 dB headroom, impedance 4.4k Ohms, 5 VDC bias supply Line input unbalanced Stereo/Mono Input. Two (2) Dual (RCA) Phono connectors, unbalanced, -10 dBu nominal input, +14 dB headroom, impedance 10k Ohms Line input balanced Mono Input. Two (2) Phoenix Type connector, balanced, + 4 dBu nominal input, +14 dB headroom, impedance 100k Ohms - ListenIR 2-Channel Transmitter/Radiator Combo (Dante)Model LT-84-D
Specs and datasheet
ListenIR 2-Channel Transmitter/Radiator Combo (Dante) datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz, Selectable Channels Two (2) channels, Selectable carrier frequency Coverage 2,787 m² (30,000 ft²) single channel with LR-4200-IR/LR-5200-IR receivers or 697 m² (7,500 ft²) single channel with LR-42/LR-44 receivers Snr > 70 dB (SNR) Line Input> 60 dB (SNR) System Specification (wireless end-to-end with LR-44) dB Frequency response 20 Hz – 20 kHz (+/- 1 dB) Line Input63 Hz – 15 kHz (+/- 3 dB) System Specification (wireless end-to-end with LR-44) Hz Mic input Two (2) 3.5 mm (0.14 in.) Tip/Sleeve connector, -30 dBu nominal input, +14 dB headroom, impedance 4.4k Ohms, 5 VDC bias supply Line input unbalanced Stereo/Mono Input. Two (2) Dual (RCA) Phono connectors, unbalanced, -10 dBu nominal input, +14 dB headroom, impedance 10k Ohms Line input balanced Mono Input. Two (2) Phoenix Type connector, balanced, + 4 dBu nominal input, +14 dB headroom, impedance 100k Ohms - ListenIR 1-Channel TransmitterModel LT-82
Specs and datasheet
ListenIR 1-Channel Transmitter datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz Channels Four (4) channels. Selectable one (1) channel per transmitter (mono or stereo) channels Snr Mono: > 60 dBStereo: > 52 dB Frequency response 63 Hz – 15 kHz (+/- 3 dB) Hz Audio input 1 Mono Input (Rear Panel). Female-XLR and 1/4 in. combo connector, balanced, 0/-55 dBu (line/mic) nominal input level adjustable; +21/-30 dBu (line/mic) maximum input level; impedance 20k/1k ohms (line/mic); phantom power +12 VDC Power 30 VDC, 1.5 A Power output Two (2) RJ-45 jacks. For remote powering up to two (2) radiators Width 8.50 in. (21.5 cm) in Height 1.75 in. (4.5 cm) in Depth 9.13 in. (23 cm) in Weight 2.6 lbs. (1.18 kg) lb - ListenIR 1-Channel Transmitter (Dante)Model LT-82-01-D
Specs and datasheet
ListenIR 1-Channel Transmitter (Dante) datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz Channels Four (4) channels. Selectable one (1) channel per transmitter (mono or stereo) channels Snr Mono: > 60 dBStereo: > 52 dB Frequency response 63 Hz – 15 kHz (+/- 3 dB) Hz Audio input 2 Stereo or Mono Input (Rear Panel). Two (2) Phono connectors, unbalanced, -10/+10 dBu nominal input level adjustable, +30 dBu maximum, impedance 100k Power 30 VDC, 1.5 A Power output Two (2) RJ-45 jacks. For remote powering up to two (2) radiators Width 8.50 in. (21.5 cm) in Height 1.75 in. (4.5 cm) in Depth 9.13 in. (23 cm) in Weight 2.6 lbs. (1.18 kg) lb - Dante 1 Channel Output XLR AdapterModel LA-465
Specs and datasheet
Dante 1 Channel Output XLR Adapter datasheet (PDF)Audio transport Dante Audio over IP and ASE67 RTP transport formats Power required Power Over Ethernet Switch or 802.3af Compliant POE Injector Audio connection XLR Cable length 28 cm (11 in.) cm

Radiators
The LA-140 covers up to 40,000 sq ft on one channel. It mounts on a wall, ceiling, corner, desk, mic stand or tripod, in gray or white. The LA-141 extends an LT-84, up to two per unit.
- Stationary IR Radiator (White or Gray)Model LA-140 (GY or WH)
Specs and datasheet
Stationary IR Radiator (White or Gray) datasheet (PDF)Coverage 3,716 m² (40,000 ft.²) maximum coverage per radiator when used with LR-4200 / LR-5200 Receivers Emitter power 3 W Power input RJ-45 connector. 30 VDC, powered from transmitter via CAT-5 cable or optional LA-205 power supply. VDC Power output RJ-45 connector. 30 VDC, powers up to one additional radiator. (Maximum two radiators powered from each LT-82 transmitter or LA-205 power supply) Cable length 250 ft. with (1) LT-82 and (2) LA-140 or 700 ft. with (1) LT-82 and (1) LA-140. ft Width 8.00 in. (203 mm) in Height 5.50 in. (140 mm) in Depth 2.60 in. (66 mm) in Weight 2.1 lbs. (0.95 kg) lb Color LA-140-GY (Gray), LA-140-WH (White) Mounting Radiator can be mounted on a wall, on a ceiling, in a corner, on a desk, on a mic stand or on a tripod. Wall box mounting plate fits a standard single gang electrical box. - ListenIR Expansion Radiator (For LT-84 only)Model LA-141
Specs and datasheet
ListenIR Expansion Radiator (For LT-84 only) datasheet (PDF)Coverage 30,000 ft² (2787 m²) single channel with LR-4200-IR/LR-5200-IR receivers or 7,500 ft² (697 m²) single channel with LR-42/LR-44 receivers Ir power 1.49 W Channels Two (2) channels Expansion link One (1) RJ-45 connector – Provides RF Signal and Power to one additional LA-141.CAT-5e cable 24 AWG, 100 ft. (30 m) maximum cable length, two (2) LA-141s per daisy chain (total daisy chain cannot extend beyond two expansion radiators) Power 12 VDC, Provided via LT-84 Expansion Link Output RJ-45s Current draw 600 mA per LA-141, maximum of two (2) LA-141s daisy chained with CAT-5e cable 24 AWG 100 ft. (30 m) to each LT-84 Expansion Link Output

Receivers
Pocket receivers on all four infrared channels, with 8 hours of use and a 2.5 hour charge. The LR-4200-IR stays on the channel the venue sets; the LR-5200-IR adds a button so the listener can switch.
- Intelligent DSP IR ReceiverModel LR-4200-IR
Specs and datasheet
Intelligent DSP IR Receiver datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz Channels Four (4) selectable channels Coverage 30,000 ft² (2787 m²) single channel with LT-84/LA-141 or 40,000 ft² (3716 m²) single channel with LT-82/LA-140 sq ft User controls Power on/off and volume up/down Battery Lithium Ion Battery life 8 Hours of typical use Charge time Fully charged in 2.5 Hours Snr > 60 dB Frequency response 63 Hz – 15 kHz (±3 dB) Hz Weight 2.8 oz. (79.4 g) oz - Advanced Intelligent DSP IR ReceiverModel LR-5200-IR
Specs and datasheet
Advanced Intelligent DSP IR Receiver datasheet (PDF)Carrier frequencies 2.3 MHz, 2.8 MHz, 3.3 MHz, 3.8 MHz Channels Four (4) selectable channels Coverage 30,000 ft² (2787 m²) single channel with LT-84/LA-141 or 40,000 ft² (3716 m²) single channel with LT-82/LA-140 sq ft User controls Power on/off, volume up/down, Listen button for end user channel selection Battery Lithium Ion Battery life 8 Hours of typical use Charge time Fully charged in 2.5 Hours Snr > 60 dB Frequency response 63 Hz – 15 kHz (±3 dB) Hz Weight 2.8 oz. (79.4 g) oz

Neck loops and charging
The LA-430 lanyard is also a neck loop for hearing aids with a T-coil. Charge receivers 12 at a time on the LA-381-01 tray, or four at a time on the USB charger.
- Intelligent Ear Phone/Neck Loop LanyardModel LA-430
Specs and datasheet
Intelligent Ear Phone/Neck Loop Lanyard datasheet (PDF) - Intelligent 12-Unit Charging TrayModel LA-381-01
Specs and datasheet
Intelligent 12-Unit Charging Tray datasheet (PDF)Capacity 12 Units Power 5.0 VDC, 8 A, 40 W Dimensions 4.45 cm x 35.56 cm x 19.05 cm (1.75 in. x 14 in. x 7.5 in.) in Unit weight 2.27 kg (5.0 lbs.) lb - 4-Port USB ChargerModel LA-423-01
Specs and datasheet
4-Port USB Charger datasheet (PDF)Power 5.0 VDC, 4.8 A, 24.0 W Dimensions 2.44 in. x 2.90 in. x 1.13 in. (62 mm x 74 mm x 29 mm) in Unit weight 7.80 oz. (221 g) lb Cable type 4 – USB to Micro USB Cables (LA-422)
Why buy from ABBN
Buying through ABBN means one team from the floor plan to the last spare receiver. We check each system against Listen's current range, size the radiators to the room, and supply extra receivers as your needs grow.
Authorized Listen Technologies dealer
Current Listen models only, supplied nationwide by a team in business since 1994. We are also authorized for Televic, Bosch, Williams AV and Fluent Audio, so one supplier can cover every room you run.
We supply the interpreters too
A second channel is only useful with someone to speak on it. Our sister company U.S. Translation provides interpreters in the room for hearings, board meetings and events. InterpretCloud runs remote interpreting on its own platform.

Planning the radiators
Each LA-140 radiator covers up to 40,000 sq ft on one channel with the iDSP receivers, and that area halves each time the channels double. The LT-84 covers 30,000 sq ft on one channel and 15,000 on two, and up to two LA-141 expansion radiators extend it.
Listen recommends at least two radiators in all but small rooms, mounted about 16 ft high. Balconies and sunlit windows change the plan, so a floor plan and the ceiling height help us get it right.
See all infrared systems →Complete solutions
Ready-planned setups that use infrared listening.

Everything you need for an ADA-compliant venue
Receivers, neck loops and signage sized to the ADA minimum for your seats.
See the full setup →
Everything you need for a council chamber
A full chamber setup, with listening for the public gallery.
See the full setup →
Everything you need for a multilingual conference
Interpretation channels for a conference in several languages.
See the full setup →Have a custom request?
Not every event fits a standard kit. Maybe it is a model we do not list, an unusual room or a tight deadline. Tell us what you need, and our team builds the solution around it.
Frequently asked questions
What buyers ask us most about infrared listening.
What is the difference between the LR-4200-IR and the LR-5200-IR?
Both receive all four infrared channels and run 8 hours on a charge. The LR-4200-IR stays on the channel the venue sets. The LR-5200-IR has a button so the listener can switch, which you need when the room carries two or more channels.
What comes in the LR-5200-IR Package 1?
One LR-5200-IR receiver with an LA-430 neck loop lanyard and an LA-401 ear speaker, ready to hand to a listener.
Is there a difference between the LA-140-GY and LA-140-WH?
Only the color. Both are the same stationary radiator, in gray or white to match the ceiling or wall.
Why choose infrared over RF?
Infrared stays inside the room, so neighboring rooms can run their own systems and confidential audio does not leak. RF reaches further and does not need a line of sight, which suits large halls and outdoor sites.
Does ListenIR work with hearing aids?
Yes. The LA-430 lanyard doubles as a neck loop, so a hearing aid with a T-coil picks up the sound directly. It counts toward the ADA hearing-aid compatible minimum.
Can ListenIR take audio from a Dante network?
Yes. The LT-84-D and LT-82-01-D include the LA-465 Dante adapter, which needs a PoE network switch that is not included.
Why is there no price on this page?
A ListenIR system is priced on its parts: the transmitters, the radiators for your floor area, the receivers and the charging. Configure it above and we reply with a quote for exactly that setup.
Related systems
Listen systems that work alongside ListenIR, or suit a different venue.
Want to explore the datasheets?12 PDFs
Transmitters
Neck loops and charging
Ready to price your room?
Seat count, unit type and a date are enough to start. We reply fast, with a quote for exactly that bundle.









