ABBN|Authorized dealer for Williams AV · Listen Technologies · Televic · Bosch · Fluent AudioContact|Call 480-596-0047
Get a fast quote
Judge in a courtroom listening through headphones from an infrared assistive listening system
Williams AVBundle, built to your room

Williams AV IR+ infrared assistive listening system

The Williams AV IR+ infrared assistive listening system carries a room's sound on infrared light that stays inside the walls. Courtrooms, boardrooms and theaters keep it private, and the room next door can run its own. One IR+ control center feeds up to 16 emitters and streams the same audio to phones. The standalone IR T1 and IR T3 transmitters cover a TV or a single room.

18,000
sq ft per IR E4 emitter
16
emitters on one control center
2
audio channels at once

Prefer to call? 480-596-0047

Is IR+ the right system?

Infrared is the choice when the sound must not leave the room. A courtroom can keep testimony private, and two auditoriums side by side can each run their own channels without hearing each other. Emitters need a clear line of sight to the listeners. We plan their number from the shape of the room, its balconies and its ceiling, not only its floor area.

Build your bundle

ABBN lets you put together exactly what your room needs: any mix of control units, emitters, receivers and charging. Order any quantity, from spare receivers for an existing system to a full chamber. Nothing comes as a fixed package unless you want one.

  1. Answer only what is relevant to youSkip anything you are not sure of. We fill the gaps with you before we quote.
  2. Watch your bundle buildEvery answer adds the parts it needs, with an estimated quantity.
  3. Get a fast replyWe check every line against Williams AV's current range and reply fast with one itemized quote.
Are you buying or renting?

You are pricing a purchase. Renting for one event? Switch to Rent and add your dates at the end.

0 done
Your bundle

Trusted by organizations across the US

School districts, churches, nonprofits and companies that work with ABBN.

Visalia Unified School District logoFreeport-McMoRan logoChicanos Por La Causa logoSan Gabriel/Pomona Regional Center logoChurch of the Nazarene logoThe Foursquare Church logoWhittier Union High School District logoSnowline Joint Unified School District logo

Ready-made bundles

Packaged by Williams AV, from a single TV listener to a full IR+ room. Quote one as it is, or build your own above.

IR+ Control Center (infrared modulator and Wi-Fi server)x1+IR+ Emitterx2+Four-channel body-pack infrared receiverx4
Model IR SY11

IR+ Complete (IR SY11), IR+ system with 4 body-pack receivers

Good for a courtroom or boardroom where some listeners use hearing aids: pocket receivers, headphones and neckloops.

  • 1 x IR+ Control Center (infrared modulator and Wi-Fi server)
  • 2 x IR+ Emitter
  • 4 x Four-channel body-pack infrared receiver
  • 2 x CHG 3502
  • 2 x NKL 001
  • 4 x HED 021
  • 4 x BAT 026-2
  • 1 x MLB 003
  • 2 x BKT 024
  • 1 x IDP 008
IR+ Control Center (infrared modulator and Wi-Fi server)x1+IR+ Emitterx2+SoundPlus stethoset (under-chin) infrared receiverx5
Model IR SY12

IR+ Secure (IR SY12), IR+ system with 5 stethoset receivers

Good for theaters and churches that hand out receivers at the door: under-chin units with no cables.

  • 1 x IR+ Control Center (infrared modulator and Wi-Fi server)
  • 2 x IR+ Emitter
  • 5 x SoundPlus stethoset (under-chin) infrared receiver
  • 1 x CHG 520
  • 2 x NKL 001
  • 1 x MLB 003
  • 2 x BKT 024
  • 1 x IDP 008
IR+ Control Center (infrared modulator and Wi-Fi server)x1+IR+ Emitterx2+IDP 008x1
Model IR ME2

IR+ Flex (IR ME2), modulator with two emitters

Good for a room that already has receivers, or a large room that needs two emitters.

  • 1 x IR+ Control Center (infrared modulator and Wi-Fi server)
  • 2 x IR+ Emitter
  • 1 x IDP 008
  • 1 x MLB 003
IR+ Control Center with Dantex1+IR+ Emitterx2+IDP 008x1
Model IR ME2 D

IR+ Flex with Dante

Good for the same two-emitter setup fed from a Dante network.

  • 1 x IR+ Control Center with Dante
  • 2 x IR+ Emitter
  • 1 x IDP 008
  • 1 x MLB 003
IR+ Control Center (infrared modulator and Wi-Fi server)x1+IR+ Emitterx1+IDP 008x1
Model IR ME1

IR+ Combo (IR ME1), modulator with one emitter

Good for a single room covered by one emitter, with receivers chosen separately.

  • 1 x IR+ Control Center (infrared modulator and Wi-Fi server)
  • 1 x IR+ Emitter
  • 1 x IDP 008
Small-area infrared transmitterx1+Four-channel body-pack infrared receiverx1+STD 008x1
Model IR SY1

Small-area infrared system for one

Good for one person watching TV at home or in a care room.

  • 1 x Small-area infrared transmitter
  • 1 x TFP 055
  • 1 x WCA 106
  • 1 x WCA 124
  • 1 x WCA 055
  • 1 x Four-channel body-pack infrared receiver
  • 1 x STD 008
  • 1 x HED 021
  • 1 x BAT 001-2
Show more bundles
Small-area infrared transmitterx1+Four-channel body-pack infrared receiverx2+STD 008x1
Model IR SY2

Small-area infrared system for two

Good for two TV listeners, with rechargeable receivers and a neckloop.

  • 1 x Small-area infrared transmitter
  • 1 x TFP 055
  • 1 x WCA 106
  • 1 x WCA 124
  • 2 x Four-channel body-pack infrared receiver
  • 1 x STD 008
  • 2 x HED 027
  • 1 x NKL 001
  • 1 x CHG 3502
  • 2 x BAT 026-2
Four-channel body-pack infrared receiverx1+NKL 001x1
Model WIR RX22-4N-NKL

WIR RX22-4N receiver with neckloop (WIR RX22-4N NKL)

  • 1 x Four-channel body-pack infrared receiver
  • 1 x NKL 001

Not sure which setup you need?

Send us a floor plan or photos of the room, or give us a call. We reply fast, count the emitters from the line of sight and tell you which receivers suit your listeners.

What is inside an IR+ infrared assistive listening system

Every IR+ system is built from four parts. A control center takes the room's audio, and emitters on the walls or ceiling send it as infrared light. Listeners get receivers, with the charging, brackets and earpieces to suit them. Small rooms and single TVs can skip the control center and use a standalone IR T1 or IR T3 transmitter.

Williams AV IR M1 IR+ control center

IR+ control center

The IR M1 takes two audio inputs over XLR or jack and sends two channels at once to up to four emitters directly. It also streams the same audio to the free WaveCAST app over the venue's Wi-Fi. The IR M1 D adds a Dante input.

  • IR+ Control Center (infrared modulator and Wi-Fi server)
    Model IR M1
    Specs and datasheet
    TechnologyInfrared plus WaveCAST audio over Wi-Fi from one box
    Carrier frequencies2.3/2.8 MHz or 3.3/3.8 MHz, selectable
    Simultaneous channels2 (4 wideband channels available, 2 operate at once) channels
    Audio inputs2 combination XLR / 1/4 in TRS, line or microphone, selectable phantom power
    Emitter outputs4 RJ-45 ports (CAT5e) supplying 48 VDC, RS-485 and baseband to IR E4 emitters
    Max emitters4 direct; up to 16 IR E4 with up to 4 IR A4 arrays
    Signal to noise67 dB
    DanteNo (Dante is the IR M1 D)
    IR+ Control Center (infrared modulator and Wi-Fi server) datasheet (PDF)
  • IR+ Control Center with Dante
    Model IR M1 D
    Specs and datasheet
    DanteDante input (Audinate Ultimo UXT), 2 channels
    Carrier frequencies2.3/2.8 MHz or 3.3/3.8 MHz, selectable
    Simultaneous channels2 channels
    Max emitters4 direct; up to 16 IR E4 with IR A4 arrays
    IR+ Control Center with Dante datasheet (PDF)

Why buy from ABBN

Buying IR+ through ABBN means one team from the floor plan to the last spare receiver. We specify each system against Williams AV's current range and count the emitters from the room's line of sight. We also supply extra receivers, neckloops and chargers as your audience grows.

Authorized Williams AV dealer

Current Williams AV models only, supplied nationwide by a team that has worked in conference audio since 1994. We are also authorized for Televic, Bosch, Listen Technologies and Fluent Audio, so one supplier can cover every room you run.

Two channels, two languages

The second IR+ channel can carry an interpreted language, and the IC-2 console lets one or two interpreters work into it. Our sister company U.S. Translation provides those interpreters in the room, and InterpretCloud runs remote sessions on its platform.

Williams AV IR M1 control center connected to four IR E4 emitters and a Wi-Fi router

Infrared and phones from one box

The IR M1 sends the same audio two ways at once. Infrared goes to the emitters, and audio travels over the venue's Wi-Fi to the free WaveCAST app. Each listener can then use a receiver or their own phone.

Tell us in the builder whether you want phone listening as well, and we include it in the quote.

See WaveCAST Wi-Fi listening →

Have a custom request?

Not every event fits a standard kit. Maybe it is a model we do not list, an unusual room or a tight deadline. Tell us what you need, and our team builds the solution around it.

Send a custom request →

Frequently asked questions

What buyers ask us most about IR+, from emitters to hearing aids.

What is the difference between IR+ Complete and IR+ Secure?

Both are full IR+ systems with an IR M1 control center and two IR E4 emitters. IR+ Complete (IR SY11) comes with four pocket receivers, headphones, two neckloops and rechargeable batteries. IR+ Secure (IR SY12) comes with five under-chin receivers and a 5-bay charger.

How many emitters does a room need?

One IR E4 covers up to 18,000 sq ft in single-channel mode. Every listener needs a clear line of sight to an emitter, so balconies, pillars and odd shapes can call for more. Send us a floor plan and we count them.

Can an infrared system carry a second language?

Yes. IR+ sends two channels at once, so one can carry the floor and the other an interpreted language. The IC-2 interpreter console serves one or two interpreters and routes them to the right channel.

Do the receivers work with hearing aids?

Yes, through a neckloop. The WIR RX22-4N has a jack for one, and the neckloop sends the sound straight into hearing aids with a T-coil. IR+ Complete and IR+ Secure each include two.

How long do receiver batteries last?

The WIR RX22-4N runs about 60 hours on alkaline AA batteries, or about 30 hours per charge on rechargeable ones. The IR RX20 has a built-in battery for about 8 hours and charges in a 5-bay or 15-bay charger.

Can you add to an older Williams Sound infrared system?

Often. The IR T3 replaces the IR T2, while the IR E4 emitter needs an IR M1 and does not work with older MOD 232 systems. Tell us the model numbers you have and we check what can stay.

Why is there no price on this page?

An IR+ system is priced on its parts: the control center, the emitters, the receivers and the charging. Build your bundle above and we reply with a quote for exactly that setup.

Ready to price your room?

Seat count, unit type and a date are enough to start. We reply fast, with a quote for exactly that bundle.